Transmission Jacks by NORCO

Show:
Sort By:
72025 - NORCO - 1 1/2 Ton Capacity Wide Chassis Opening Truck T

72000E - NORCO - 1 1/2 Ton Cap. Truck Transmission Jack 

Same as the model 72000E but with a wider chassis opening plus a broader lift range to handle a larger variety of transmission configurations 

FEATURES:

  • Fully adjustable saddle with adjustable angle brackets to position the transmission.

  • Four 4" high risers handle transmissions with offset transfer cases.

  • Two heavy duty ratchet tie-downs conveniently secure the load to the lifting saddle.

  • Safety by-pass and overload systems to prevent cylinder damage and prevent the jack from being used beyond its rated capacity.

  • Full 360 degree rotating handle operates in any position.

  • Flash chromed ram inhibits rust from entering the hydraulic system.

  • Four full-swivel ball bearing 4" caster wheels for easy positioning.

$1,985.00

- +
72050E - NORCO - 1/2 Ton Cap. Hyd. Transmission Jack

72050E - NORCO - 1/2 Ton Cap. Hyd. Transmission Jack 

For the removal and installation of automobile and light truck transmissions or differentials. 

 FEATURES:

  • Wide chassis with open front provides:

    - Wider opening for saddle and transmission to come lower to the ground for easy removal.

    - Efficient load distribution and stability.

    - Easy access to saddle tilt knobs.

  • Fully adjustable universal saddle with adjustable corner brackets and safety chain.

  • Safety by-pass system prevents damage to cylinder.

  • Safety overload system prevents jack from being used beyond its rated capacity.

  • Full 360 degree rotating pump handle operates in any position.

  • Flash chromed ram inhibits rust from entering the hydraulic system.

  • Four full-swivel ball bearing caster wheels for easy positioning.

  • Wide chassis for efficient load distribution and stability.

 

$505.00

- +
72508 - NORCO - Fuel Tank Saddle Adapter

72508 - NORCO - Fuel Tank Saddle Adapter 

An optional saddle adapter which is used in conjuction with a NORCO transmission jack to remove, install and transport (in lowered position) automobile and light truck emptied fuel tanks and other undercar components

FEATURES:

  • Handles automotive and light duty truck fuel tanks up to 40 gallon capacity.

  • Tanks are to be emptied before handling.

  • Four adjustable support risers with rubber pads protect the fuel tank and can be quickly positioned to fit many shapes and sizes.

  • Includes two load restraint straps.

  • Weight: 37 LBS

$264.00

- +
72525 - NORCO - Quick-Adjust Saddle

72525 - NORCO - Quick-Adjust Saddle 

An optonal saddle that replaces the 4 adjustable corner brackets found on the standard universal saddle.

 FEATURES:

  • Quickly adapts to the existing universal saddle plate.
  • Four low profile ratcheting arms quickly and easily adjust to the transmission pan configuration.

$145.00

- +
72550B - NORCO - 1/2-Ton Telescopic Under-Hoist Double Pump Tran

72550B - NORCO - 1/2-Ton Telescopic Under-Hoist Double Pump Trans. Fast Jack

Designed for the removal, installation and transportation (in the lowered position) of transmissions and transfer cases on passenger cars, vans and light trucks that are raised by an in-ground or above-ground lift.

FEATURES:

  • U.S. Patent No. 5,975,496 (Double Pump Design)

  • Fully adjustable universal saddle with hand adjustable corner brackets and safety chain.

  • Safety overload system prevents jack from being used beyond its rated capacity.

  • Foot operated pump and lowering pedals allow use of both hands to position and align saddle with transmission.

  • Two-stage flash chromed rams inhibit rust from entering hydraulic system.

  • Wide base with four easy rolling 4" diameter swivel ball bearing caster wheels provides stability and easy maneuvering in its lowered position. The polyurethane wheels provide protection for expensive tile and epoxy floors.

  • Two times faster rising action as model 72500E with no load or a load up to 400 pounds.

  • Same rising action as model 72500E for loads between 400 and 1,000 pounds.

$1,075.00

- +
72000E - NORCO - 1 1/2 Ton Cap. Truck Transmission Jack

FEATURES:

  • Wide chassis with open front provides:
    - Wider opening for saddle and transmission to come lower to the ground for easy removal.
    - Efficient load distribution and stability.
    - Easy access to saddle tilt knobs.
  • Fully adjustable universal saddle with adjustable arms to position the transmission.
  • Heavy duty chain with convenient chain tensioner secures load to the saddle.
  • Safety overload system prevents jack from being used beyond the ASME/PASE load-limiting standard.
  • Full 360 degree rotating handle operates in any position.
  • Flash chromed ram inhibits rust from entering the hydraulic system.
  • Four 4" diameter full-swivel ball bearing caster wheels for easy positioning.
 
 

$1,980.00

- +
72450B - NORCO - 1/2-Ton Air/Hyd. FastJack Telescopic Transmission Jack

FEATURES:

  • U.S. Patent No. 7,171,807
  • Air/hydraulic foot pump provides hands free operation and easy, convenient lifting.
  • Metered pump valve provides safe lowering of load.
  • Fully adjustable universal saddle with hand adjustable corner brackets and safety chain.
  • Safety overload system prevents jack from being used beyond the ASME/PASE load-limiting standard.
  • Two-stage flash chromed rams inhibit rust from entering hydraulic system.
  • Wide base with four easy rolling 4" diameter swivel ball bearing caster wheels (one is a locking caster wheel) provides stability and easy maneuvering in its lowered position.
  • Polyurethane wheels provide protection for expensive tile and epoxy floors.
 
 

$1,505.00

- +
72475A - NORCO - 3/4 Ton Telescopic Air/Hydraulic Transmission Jack

FEATURES:

  • U.S. Patent No. 7,171,807
  • Air/hydraulic foot pump provides hands free operation and easy, convenient lifting.
  • Metered pump valve provides safe lowering of load.
  • Fully adjustable universal saddle with hand adjustable corner brackets and safety chain.
  • Safety overload system prevents jack from being used beyond the ASME/PASE load-limiting standard.
  • Two-stage flash chromed rams inhibit rust from entering hydraulic system.
  • Comes with a larger 10-1/4” x 15-1/8” saddle plate and four adjustable “L”-shaped locating bars.
  • Wide base with four easy rolling 4” diameter swivel ball bearing caster wheels (two are locking caster wheels) provides stability and easy maneuvering in its lowered position.
  • The wheels, made from a phenolic resin, offer high impact resistance and are non-marking for protection of tile and epoxy floors.

 

$1,861.00

- +
72500E - NORCO - 1/2 Ton Capacity Telescopic Single Pump Transmission Jack.

FEATURES:

  • Fully adjustable universal saddle with hand adjustable corner brackets and safety chain.
  • Safety overload system prevents jack from being used beyond the ASME/PASE load-limiting standard.
  • Foot operated pump and lowering pedals allow use of both hands to position and align saddle with transmission.
  • Two-stage flash chromed rams inhibit rust from entering hydraulic system.
  • Wide base with four easy rolling 4" diameter swivel ball bearing caster wheels provides
    stability and easy maneuvering in its lowered position.
  • Polyurethane wheels provide protection for expensive tile and epoxy floors.

$1,025.00

- +
72550B - NORCO - 1/2-Ton Telescopic Under-Hoist Double Pump Transmission Jack

FEATURES:

  • U.S. Patent No. 5,975,496 (Double Pump Design)
  • Fully adjustable universal saddle with hand adjustable corner brackets and safety chain.
  • Safety overload system prevents jack from being used beyond the ASME/PASE load-limiting standard.
  • Foot operated pump and lowering pedals allow use of both hands to position and align saddle with transmission.
  • Two-stage flash chromed rams inhibit rust from entering hydraulic system.
  • Wide base with four easy rolling 4" diameter swivel ball bearing caster wheels provides stability and easy maneuvering in its lowered position.
  • Two times faster rising action as model 72500E with no load or a load up to 400 pounds.
  • Same rising action as model 72500E for loads between 400 and 1,000 pounds.
  • Polyurethane wheels provide protection for expensive tile and epoxy floors.

$1,092.00

- +
72700A - NORCO - 1 Ton Capacity Transmission Jack

FEATURES:

  • Fully adjustable universal saddle with adjustable corner brackets and safety chain.
  • Safety overload system prevents jack from being used beyond the ASME/PASE load-limiting standard.
  • 2” diameter, flash chromed, single stage ram provides added stability throughout the entire lift range.
  • Foot operated pump and lowering pedals allow use of both hands to position and align saddle with transmission.
  • Wide base with four 3-7/8” diameter heavy duty swivel ball bearing caster wheels provides stability and easy maneuvering.
 
 

$1,517.00

- +
72701A - NORCO - 1 Ton Cap. Air/Hydraulic Transmission Jac

FEATURES:

  • Air/hydraulic foot pump provides hands free operation and easy convenient lifting.
  • Metered pump valve provides safe lowering of load.
  • Fully adjustable universal saddle with adjustable arms to position the transmission.
  • Safety overload system prevents jack from being used beyond the ASME/PASE load-limiting standard.
  • Heavy duty chain with convenient chain tensioner secures load to saddle.
  • 2” diameter, flash chromed, single stage ram provides added stability throughout the entire lift range.
  • Wide base with four 3-7/8” diameter heavy duty swivel ball bearing caster wheels provides stability and easy maneuvering.

 

$1,966.00

- +

Automotive Lift and Alignment only ships within the continental United States. For Hawaii and Alaska, please see our FAQ.