Jack Stands by NORCO

Show:
Sort By:
82019 - Norco - 20 Ton Capacity Truck Ramps (Pair)

    Elevates front or rear of vehicle for access to frame and components. Particularly useful on vehicles with low profile or ground-effects.

    FEATURES:

      •  Handles tires with up to 10” tread widths.
      •  Telescopic 34" T-handle extends and lifts up to expose wheels for easy
         maneuverability around the shop. Retracts for easy storage.
      •  Perforated holes in ramps provide traction for the tires.
      •  Non-skid rubber base pads prevent slippage when driving onto or off of ramps.

 

$590.00

- +
81004C - Norco 3 Ton Ratchet Style Jack Stand (Pair)

For use where vehicle is to be supported before making repairs.

FEATURES:

      • Unique spring loaded pawl provides constant locking pressure against lifting column.
      • Four legged base with foot pads for added strength and a more secure footing on asphalt.
      • Common machine bolt secures lifting column to stand and provides added strength when stand is continuously lifted and handled by the column.
      • Recessed column saddle for acceptance of vehicle panel rail.
      • Positive lock handle cannot be disengaged until load is off the saddle column. Lock handle can be used as a carrying handle.
      • ALL STANDS ARE INTENDED TO BE USED IN PAIRS.

$50.00

- +
81006D - Norco 6 Ton Ratchet Style Jack Stands (Pair)

For automotive use where vehicle is to be supported before making repairs.

FEATURES:

     Unique spring loaded pawl provides constant locking pressure against lifting column.

  • Four legged base with foot pads for added strength and a more secure footing on asphalt.
  • Common machine bolt secures lifting column to stand and provides added strength when stand is continuously lifted and handled by the column.
  • Recessed column saddle for acceptance of vehicle panel rail.
  • Positive lock handle cannot be disengaged until load is off the saddle column. Lock handle can be used as a carrying handle.
  • ALL STANDS ARE INTENDED TO BE USED IN PAIRS.

$80.00

- +
81012 - Norco - 12 Ton Jack Stands (Pair)

For use in fleet garages, agricultural and construction maintenence shops.

                                                        FEATURES:

  • Unique spring loaded pawl provides constant locking pressure against lifting column.
  • Four legged base with foot pads for added strength and a more secure footing on asphalt.
  • Common machine bolt secures lifting column to stand and provides added strength when stand is continuously lifted and handled by the column.
  • Recessed column saddle for acceptance of vehicle panel rail.
  • Positive lock handle cannot be disengaged until load is off the saddle column. Lock handle can be used as a carrying handle.
  • ALL STANDS ARE INTENDED TO BE USED IN PAIRS.

$199.00

- +
81022A - Norco - 20 Ton Capacity Trailer Stabilizing Stand

Meant to stabilize and assist in supporting the front or rear of a loaded or unloaded tractorless trailer.  Sold individually but generally used in pairs.

FEATURES:

  • Meets OSHA requirements for supporting trailers when loaded or unloaded.
  • 14” diameter base provides maximum leveling stability.
  • Quick adjust spin handle for ease of turning.
  • Large diamond plate saddle to grip the load.
  • 1-1/2” diameter, grade 5, heavy duty screw and nut provide maximum strength and fine adjustment.

 

Import option available for $210 

$265.00

- +
81033A - Norco - 3/4 Ton Capacity Under-hoist Jack Stand

Designed to support vehicle components, not the vehicle.  Ideal for exhaust system installation, shock absorber replacement and any task which requires relieving pressure off components.

FEATURES:

  • Lightweight, slender design makes handling easy, even in close quarters.
  • Quick adjust spin handle with thrust bearing eliminates wear and provides ease of turning under load.
  • 1-1/4” diameter acme threaded screw has 26-1/4” of travel.

$109.00

- +
81034A - Norco - 3/4 Ton Underhoist Stand with Pedal

Designed to support vehicle components, not the vehicle.  Ideal for exhaust system installation, shock absorber replacement and any task which requires relieving pressure off components.

FEATURES:

  • Lightweight, slender design makes handling easy, even in close quarters.
  • Quick adjust spin handle with thrust bearing eliminates wear and provides ease of turning under load.
  • Foot pedal generates 1” additional stroke and 400 pounds of force at the saddle.
  • Pedal may be locked in vertical position for storage or shipment.
  • 1-1/4” diameter acme threaded screw has 26-1/4” of travel

$119.00

- +
81035A - Norco - 1.5 Ton Underhoist Stand

Intended to assist in stabilizing and supporting a vehicle that is raised by an in-ground or above-ground lift.

FEATURES:

  • An adjustment pin chained to the stand secures the support column at 6 different height positions.
  • Quick adjust spin handle with thrust bearing eliminates wear and provides ease of turning under load.
  • 1-1/4” diameter acme threaded screw has 6-1/2” of travel for fine adjustment.
  • 5/8” thick rubber saddle pad.

$129.00

- +
81036A - Norco - 1 Ton Under-hoist Stand

Intended for lifting and positioning exhaust systems, shock absorbers and MacPherson struts.  Hydraulic power will assist in freeing frozen spring shackles, aligning wheels and steering gear adjustments.

FEATURES:

  • Foot activated pump and lowering pedals allow use of both hands to position components.
  • Spring return lowering pedal automatically closes the release valve when foot is removed from pedal.
  • 16” hydraulic travel.
  • Telescopic support tube with nine height adjustments at 2-1/2” increments.
  • A 12” diameter, 3/8” thick steel base provides added stability.
  • Two 3” diameter wheels provide easy maneuvering of stand into work position or around the shop.

$700.00

- +
81205 - Norco - 5 Ton Capacity Jack Stands (Pair)

Low profile design in order to support forklifts and heavy machinery.

FEATURES:

  • Pin type support column adjusts to four different height positions.
  • Heavy duty adjustment pin is secured to stand to prevent loss.
  • Handle provides ease of positioning and carrying.
  • 9” square base secures and stabilizes load.
Import option available for $135.00

$225.00

- +
81208 - Norco - 10 Ton Capacity Jack Stands -Short Height (Pair)

Low profile design in order to support forklifts and heavy machinery.

  FEATURES:

  • Pin type support column adjusts to multiple height positions. See specification chart.
  • Adjustment pin is secured to stand to prevent loss.
  • Four legged base made of heavy schedule 2” diameter pipe for added stability.
  • Large support saddle with locating lugs position and center load.
Import option available for $225.00

$420.00

- +
81209 - Norco -10 Ton Capacity Jack Stands- Medium Height (Pair)

Low profile design in order to support forklifts and heavy machinery.

FEATURES:

  • Pin type support column adjusts to multiple height positions. See specification chart.
  • Adjustment pin is secured to stand to prevent loss.
  • Four legged base made of heavy schedule 2” diameter pipe for added stability.
  • Large support saddle with locating lugs position and center load.
Import option available for $275.00

$460.00

- +
81210 - Norco -10 Ton Capacity Jack Stands- High Height (Pair)

Low profile design in order to support forklifts and heavy machinery.

FEATURES:

  • Pin type support column adjusts to multiple height positions. See specification chart.
  • Adjustment pin is secured to stand to prevent loss.
  • Four legged base made of heavy schedule 2” diameter pipe for added stability.
  • Large support saddle with locating lugs position and center load.
Import option availvable for $350.00

 

$536.00

- +
81225 - Norco -25 Ton Capacity Jack Stands (Pair)

Intended for use in fleet garages, agricultural and construction maintenance shops where a pin type height adjustment colum is desired.=

 FEATURES:

  • Pin type support column adjusts to four different height positions.
  • Adjustment pin is secured to stand to prevent loss.
  • Handle provides ease of positioning and carrying.
  • 3/8” thick solid steel base plate for added stability.
Import option available for $265.00

$420.00

- +
82019 - Norco - 20 Ton Capacity Truck Ramps (Pair)

Elevates front or rear ofvehicle for access to frame and components.  Particularly useful on vehicles with low profile ground-effects.
 

FEATURES:

  • Handles tires with up to 10” tread widths.
  • Telescopic 34" T-handle extends and lifts up to expose wheels for easy
    maneuverability around the shop. Retracts for easy storage.
  • Perforated holes in ramps provide traction for the tires.
  • Non-skid rubber base pads prevent slippage when driving onto or off of ramps

$590.00

- +

Automotive Lift and Alignment only ships within the continental United States. For Hawaii and Alaska, please see our FAQ.