2158 - AFF - 1100 LB Capacity Telescopic Trans. Jack

Single-stage telescopic ram for use on automobile, light truck and van transmissions, transfer cases or differentials in under-hoist applications.

FEATURES: 

• Universal head provides forward and back tilt
• Wide base for maximum stability
• Foot-operated pump frees both hands for easier saddle-to-transmission alignment
• Convenient release knob
• Head width adjusts from 8"-14"
• Head length 14"
• Base width 23" x 23"
• Adjusts from 45" low height to 71" high height
• Ship weight 103 lbs.

3198 - AFF - Fuel Tank Adapter

3198 - AFF - Fuel Tank Adapter

Converts AFF Model 3190B, 3192A and 2195A transmission jacks to remove and install fuel tanks. 

72025 - NORCO - 1 1/2 Ton Capacity Wide Chassis Opening Truck T

72000E - NORCO - 1 1/2 Ton Cap. Truck Transmission Jack 

Same as the model 72000E but with a wider chassis opening plus a broader lift range to handle a larger variety of transmission configurations 

FEATURES:

• Fully adjustable saddle with adjustable angle brackets to position the transmission.

• Four 4" high risers handle transmissions with offset transfer cases.

• Two heavy duty ratchet tie-downs conveniently secure the load to the lifting saddle.

• Safety by-pass and overload systems to prevent cylinder damage and prevent the jack from being used beyond its rated capacity.

• Full 360 degree rotating handle operates in any position.

• Flash chromed ram inhibits rust from entering the hydraulic system.

• Four full-swivel ball bearing 4" caster wheels for easy positioning.

72050E - NORCO - 1/2 Ton Cap. Hyd. Transmission Jack

72050E - NORCO - 1/2 Ton Cap. Hyd. Transmission Jack 

For the removal and installation of automobile and light truck transmissions or differentials. 

 FEATURES:

• Wide chassis with open front provides:

  - Wider opening for saddle and transmission to come lower to the ground for easy removal.

  - Efficient load distribution and stability.

  - Easy access to saddle tilt knobs.

• Fully adjustable universal saddle with adjustable corner brackets and safety chain.

• Safety by-pass system prevents damage to cylinder.

• Safety overload system prevents jack from being used beyond its rated capacity.

• Full 360 degree rotating pump handle operates in any position.

• Flash chromed ram inhibits rust from entering the hydraulic system.

• Four full-swivel ball bearing caster wheels for easy positioning.

• Wide chassis for efficient load distribution and stability.

72508 - NORCO - Fuel Tank Saddle Adapter

72508 - NORCO - Fuel Tank Saddle Adapter 

An optional saddle adapter which is used in conjuction with a NORCO transmission jack to remove, install and transport (in lowered position) automobile and light truck emptied fuel tanks and other undercar components

FEATURES:

• Handles automotive and light duty truck fuel tanks up to 40 gallon capacity.

• Tanks are to be emptied before handling.

• Four adjustable support risers with rubber pads protect the fuel tank and can be quickly positioned to fit many shapes and sizes.

• Includes two load restraint straps.

• Weight: 37 LBS

72525 - NORCO - Quick-Adjust Saddle

72525 - NORCO - Quick-Adjust Saddle 

An optonal saddle that replaces the 4 adjustable corner brackets found on the standard universal saddle.

 FEATURES:

• Quickly adapts to the existing universal saddle plate.
• Four low profile ratcheting arms quickly and easily adjust to the transmission pan configuration.

3160 - AFF - 450 LB. Capacity Trans. Jack

3172 - AFF - Low-profile 2000 LB. Capacity Jack

FEATURES:

• Designed for light truck transmissions
• Fully adjustable universal saddle with corner brackets and safety chains
• Safety overload bypass to prevent hydraulic damage
• 24” handle pivots 360° around pump
• Four industrial grade 3” casters
• Head unit adjusts width 7"-16" and length 9"-14"
• Adjusts from 5 7/8" low height to 30 3/4" high height
• 2009 ASME/PALD compliant
• Ship weight 145 lbs.

3180A - AFF - 4400 LB. Capacity Heavy-Duty Trans. Jack

AFF has the only super heavy-duty transmission jack with a 4,400 lb. capacity. Built "forge-tough" to handle removal, transport and installation of transmissions, transfer cases or differentials on heavy-duty trucks, buses, agricultural and construction equipment.

FEATURES:

72000E - NORCO - 1 1/2 Ton Cap. Truck Transmission Jack

72450B - NORCO - 1/2-Ton Air/Hyd. FastJack Telescopic Transmission Jack

72475A - NORCO - 3/4 Ton Telescopic Air/Hydraulic Transmission Jack

FEATURES:

• U.S. Patent No. 7,171,807
• Air/hydraulic foot pump provides hands free operation and easy, convenient lifting.
• Metered pump valve provides safe lowering of load.
• Fully adjustable universal saddle with hand adjustable corner brackets and safety chain.
• Safety overload system prevents jack from being used beyond the ASME/PASE load-limiting standard.
• Two-stage flash chromed rams inhibit rust from entering hydraulic system.
• Comes with a larger 10-1/4” x 15-1/8” saddle plate and four adjustable “L”-shaped locating bars.
• Wide base with four easy rolling 4” diameter swivel ball bearing caster wheels (two are locking caster wheels) provides stability and easy maneuvering in its lowered position.
• The wheels, made from a phenolic resin, offer high impact resistance and are non-marking for protection of tile and epoxy floors.

72500E - NORCO - 1/2 Ton Capacity Telescopic Single Pump Transmission Jack.

FEATURES:

• Fully adjustable universal saddle with hand adjustable corner brackets and safety chain.
• Safety overload system prevents jack from being used beyond the ASME/PASE load-limiting standard.
• Foot operated pump and lowering pedals allow use of both hands to position and align saddle with transmission.
• Two-stage flash chromed rams inhibit rust from entering hydraulic system.
• Wide base with four easy rolling 4" diameter swivel ball bearing caster wheels provides
  stability and easy maneuvering in its lowered position.
• Polyurethane wheels provide protection for expensive tile and epoxy floors.

72550B - NORCO - 1/2-Ton Telescopic Under-Hoist Double Pump Transmission Jack

72700A - NORCO - 1 Ton Capacity Transmission Jack