78099 - Norco 700 LB Capacity 4 Point Engine Support Tool

The main transverse support bar mounts on the shock strut towers to support engines.  Heavier engines can be supported by using one or both front support adaters on the transverse support bar.

78100 - Norco 1,000 LB Capacity Engine Stand

INTENDED USE:

For safe handling and positioing of most automotive engines.

FEATURES:

• Fully adjustable engine mounting head.

• Long handle and 360 degree rotating head easily position engine.

• One bolt disassembles stand for transporting or storage.

• Heavy wall tubing prevents excessive frame flex.

• 2 rigid wheels in back and 2 swivel caster wheels in front provide maximum stability and support.

• Optional equipment:

  78109: Transmission Adapter

Import option available for $195

78106A - Norco Foldable 2500 LB Capacity Engine Crane

Desinged to raise, lower and transport automobile engines, transmissions, differentials, and other heavy loads with minimal effort.

FEATURES:

• Four position telescopic boom with 3/8” proof chain and swivel mounted hook.

• 3 ton capacity hydraulic power unit provides faster raising action and a large diameter ram to withstand angle loads.

• Low profile design (4-3/4” from top of legs to ground) allows positioning under low ground clearance vehicles.

• Quick foldable legs and boom save shop space (22-1/2” x 51-3/4”) and prepare crane for transport or storage within seconds.

• 4” diameter front wheels and locking rear caster wheels provide positive steering and easy maneuvering. Locking caster wheels secure crane from moving when in use.

78108 - Norco 1250 LB Capacity Engine Stand

For safe handling and positioning of most automotive engines.  Same as model 78100 but with heavier construction to handle V8's.

FEATURES:

• Fully adjustable engine mounting head.
• Long handle and 360 degree rotating head easily position engine.
• One bolt disassembles stand for transporting or storage.
• Heavy wall tubing prevents excessive frame flex.
• 2 rigid wheels in back and 2 locking swivel caster wheels in front provide maximum stability and support.
• Four bolts disassemble stand for transporting or storage.
• Optional equipment:
  78109: Transmission Adapter

78109 - Norco Engine Stand Transmission Adapter

INTENDED USE:

  Replaces engine mounting fingers and converts engine stand into a transmission service stand.

78204A - Norco 1/2 Ton Capacity Truck Crane

Same as the model 78103A but mounts in the bed of a truck or on a loading dock.

FEATURES:

• Four position telescopic boom that folds down for traveling position or storage.
• 5 to 1 gear ratio winch with 20 foot long 1/4” diameter steel cable and hook pulls the load toward the boom.
• Winch gear design acts as a brake and allows the load to be lowered incrementally if desired and without the need for constant hand pressure against the crank handle.
• Hydraulically activated boom lifts the load to the desired height.
• Crane swivels 360 degrees but can be locked in position.

78600B - Norco 3 Ton Capacity Air/Hydraulic Floor Crane

For lifting heavy items including removal and installation of deisel engines and often their transmissions.

FEATURES:

• Multiple boom positions and leg extensions ranging from 49" to 81" provide maximum stability.

• Boom swivels 10 degrees right or left if base cannot be centered under the load.

• Includes a foot activated air/hydraulic foot pump requiring 100 P.S.I. air pressure.

78605A - Norco 3 Ton Capacity Electro/Hydraulic Floor Crane

For lifting heavy items including removal and installation of deisel engines and often their transmissions.

FEATURES:

• Multiple boom positions and leg extensions ranging from 49" to 81" provide maximum stability.
• Boom swivels 10 degrees right or left if base cannot be centered under the load.
• Includes an electro/hydraulic pump requiring 115 VAC.

82300D - Norco 1 Ton Wheel Dolly

For the removal and installation of single, tandem and duplex tires and wheels. Rigid front wheels. 

FEATURES:

• Rear swivel caster wheel and rigid front wheels provide positive steering.
• 4" wheels with polyurethane tread protect floor.
• Lift arms can be adjusted in closer to handle the more common dual wheel combinations and then adjusted outward to handle the larger combinations.
• Lift arms with ball bearing rollers easily rotate vehicle rim for bolt pattern alignment.
• Lift arms supported at both ends minimize wheel movement.
• Adjustable height push bar provides unobstructed access to hub area.
• 3-1/4” travel adjustment on rear caster wheel matches lifting arms with spindle angle.
• Safety chain included to secure wheel assembly to dolly during removal and transport.

82302B- Norco 1/2 Ton High Lift Wheel Dolly

For the removal and installation of single, tandem and duplex tires and wheels which are mounted on trucks that are supported above ground level.

FEATURES:

• Heavy duty lift arms made with ball bearing conveyer rollers which allow easy rotation of wheels for alignment with bolt pattern.

• 7-1/2” of side to side lift arm adjustment eliminates the trial and error method of aligning the rim’s lug holes with the wheel drum.

• A 1,500 pound capacity heavy duty winch with 5 to 1 gear ratio provides ease of operation.

• The winch gear design acts as a brake and allows the load to be lowered incrementally if desired and without the need for constant hand pressure against the crank handle.

• A hydraulic jack tilts the lift arms to match the angle of the spindle.

• Safety chain provided to secure tires and wheels to the dolly.

• Maneuverability is made easy by means of two rear mounted ball bearing caster wheels. The caster wheels include a locking mechanism which can prevent the dolly from moving.

78106A - NOR - Foldable 2500 LB Capacity Engine Crane

FEATURES:

• Four position telescopic boom with 3/8” proof chain and hook.
• 3 ton capacity hydraulic power unit provides faster raising action and a large diameter ram to withstand angle loads.
• Low profile design (4-3/4” from top of legs to ground) allows positioning under low ground clearance vehicles.
• Quick foldable legs and boom save shop space (22-1/2” x 51-3/4”) and prepare crane for transport or storage within seconds.
• 4” diameter front wheels and locking rear caster wheels provide positive steering and easy maneuvering. Locking caster wheels secure crane from moving when in use.

78605A - NOR - 3 Ton Capacity Electro/Hydraulic Floor Crane

FEATURES:

• Multiple boom positions and leg extensions ranging from 49" to 81" provide maximum stability.
• Boom swivels 10 degrees right or left if base cannot be centered under the load.
• Floor lock secures crane from moving when in use.
• Includes an electro/hydraulic pump requiring 115 VAC.

78100 - NOR - 1,000 LB Capacity Engine Stand

FEATURES:

• Fully adjustable engine mounting head.
• Long handle and 360 degree rotating head easily position engine.
• One bolt disassembles stand for transporting or storage.
• Heavy wall tubing prevents excessive frame flex.
• 2 rigid wheels in back and 2 swivel caster wheels in front provide maximum stability and support.
• Optional equipment:
  78109: Transmission Adapter

82302B- NOR - 1/2 Ton High Lift Wheel Dolly