Automotive Lift & Alignment

Service and Supplies for Car Enthusiasts


local: 616.805.1154

NEW from Revolution!

The Revolution R10 is a Symmetric 10,000 lb capacity 2-post lift with 3-stage front and 2-stage rear arms. The R10 features low profile, oversized pads with FREE height extensions to raise most vehicles on the road today.

Revolution's R10 is ALI Certified. The R10 lift meets the highest industry safety and performance standards. Look for the GOLD label!

Live near Grand Rapids, MI? We Offer FREE Pick Up!


  •  3-stage front and 2-stage rear arms enable greater pickup point access
  • Direct pull lifting technology - full stroke hydraulic cylinders in each column
  • Top mounted pull design cylinder protects piston inside of carriage
  • Overhead cable for equalization
  • Spring operated arm restraints, disengage at floor level
  • Padded overhead switch bar
  • Single point lock release
  • Large rubber-padded swivel adapters with extra height extensions are standard



  • Capacity: 10,000 lbs. (4535kg)
  • Rise: 71 -1/8” (1806mm)
  • Maximum Rise: 76 -1/8” (1934mm) with 5” extension
  • Overall Height: 143” (3632mm)
  • Overall Width: 131” or optional 137” (3327-4380mm)
  • Drive Through Clearance: 99” or optional 105” (2515-2667mm)
  • Overhead Switch Height: 137-1/4” (3486mm)
  • Front Reach (Min./Max.): 24-1/2” / 44-3/8” (621mm /1127mm)
  • Rear Reach (Min./Max.): 36” / 58” (914mm /1473mm)
  • Min. Adapter Height:  3-5/8” (219mm) w/ no adapter extension
  • Max. Adapter Height: 8-5/8” (792mm) w/ 5” adapter extension
  • Width Inside Column: 109” or (optional 115” (2769mm/2921mm)
  • Voltage/Amps: 208/230, 15 amps; 208/230, 16 amps
  • Motor/Phase*: 1ph/2HP/50Hz; 1ph/2HP/60Hz
  • Ceiling Height Required: 144” (3658mm)

* Optional 3-Phase Available

AFF logo
Hunter logo
Samson logo
Saylor-Beall logo
Shure logo
NORCO logo
CPS logo