81033A - Norco - 3/4 Ton Capacity Under-hoist Jack Stand

Designed to support vehicle components, not the vehicle.  Ideal for exhaust system installation, shock absorber replacement and any task which requires relieving pressure off components.

FEATURES:

• Lightweight, slender design makes handling easy, even in close quarters.
• Quick adjust spin handle with thrust bearing eliminates wear and provides ease of turning under load.
• 1-1/4” diameter acme threaded screw has 26-1/4” of travel.

81034A - Norco - 3/4 Ton Underhoist Stand with Pedal

Designed to support vehicle components, not the vehicle.  Ideal for exhaust system installation, shock absorber replacement and any task which requires relieving pressure off components.

FEATURES:

• Lightweight, slender design makes handling easy, even in close quarters.
• Quick adjust spin handle with thrust bearing eliminates wear and provides ease of turning under load.
• Foot pedal generates 1” additional stroke and 400 pounds of force at the saddle.
• Pedal may be locked in vertical position for storage or shipment.
• 1-1/4” diameter acme threaded screw has 26-1/4” of travel

81035A - Norco - 1.5 Ton Underhoist Stand

Intended to assist in stabilizing and supporting a vehicle that is raised by an in-ground or above-ground lift.

FEATURES:

• An adjustment pin chained to the stand secures the support column at 6 different height positions.
• Quick adjust spin handle with thrust bearing eliminates wear and provides ease of turning under load.
• 1-1/4” diameter acme threaded screw has 6-1/2” of travel for fine adjustment.
• 5/8” thick rubber saddle pad.

81036A - Norco - 1 Ton Under-hoist Stand

Intended for lifting and positioning exhaust systems, shock absorbers and MacPherson struts.  Hydraulic power will assist in freeing frozen spring shackles, aligning wheels and steering gear adjustments.

FEATURES:

• Foot activated pump and lowering pedals allow use of both hands to position components.
• Spring return lowering pedal automatically closes the release valve when foot is removed from pedal.
• 16” hydraulic travel.
• Telescopic support tube with nine height adjustments at 2-1/2” increments.
• A 12” diameter, 3/8” thick steel base provides added stability.
• Two 3” diameter wheels provide easy maneuvering of stand into work position or around the shop.

81205 - Norco - 5 Ton Capacity Jack Stands (Pair)

Low profile design in order to support forklifts and heavy machinery.

FEATURES:

• Pin type support column adjusts to four different height positions.
• Heavy duty adjustment pin is secured to stand to prevent loss.
• Handle provides ease of positioning and carrying.
• 9” square base secures and stabilizes load.

81208 - Norco - 10 Ton Capacity Jack Stands -Short Height (Pair)

Low profile design in order to support forklifts and heavy machinery.

  FEATURES:

• Pin type support column adjusts to multiple height positions. See specification chart.
• Adjustment pin is secured to stand to prevent loss.
• Four legged base made of heavy schedule 2” diameter pipe for added stability.
• Large support saddle with locating lugs position and center load.

81209 - Norco -10 Ton Capacity Jack Stands- Medium Height (Pair)

Low profile design in order to support forklifts and heavy machinery.

FEATURES:

• Pin type support column adjusts to multiple height positions. See specification chart.
• Adjustment pin is secured to stand to prevent loss.
• Four legged base made of heavy schedule 2” diameter pipe for added stability.
• Large support saddle with locating lugs position and center load.

81210 - Norco -10 Ton Capacity Jack Stands- High Height (Pair)

Low profile design in order to support forklifts and heavy machinery.

FEATURES:

• Pin type support column adjusts to multiple height positions. See specification chart.
• Adjustment pin is secured to stand to prevent loss.
• Four legged base made of heavy schedule 2” diameter pipe for added stability.
• Large support saddle with locating lugs position and center load.

81225 - Norco -25 Ton Capacity Jack Stands (Pair)

Intended for use in fleet garages, agricultural and construction maintenance shops where a pin type height adjustment colum is desired.=

 FEATURES:

• Pin type support column adjusts to four different height positions.
• Adjustment pin is secured to stand to prevent loss.
• Handle provides ease of positioning and carrying.
• 3/8” thick solid steel base plate for added stability.

82019 - Norco - 20 Ton Capacity Truck Ramps (Pair)

FEATURES:

• Handles tires with up to 10” tread widths.
• Telescopic 34" T-handle extends and lifts up to expose wheels for easy
  maneuverability around the shop. Retracts for easy storage.
• Perforated holes in ramps provide traction for the tires.
• Non-skid rubber base pads prevent slippage when driving onto or off of ramps

82020 - Norco - 20 Ton Capacity Wide Truck Ramps (Pair)

Elevates front or rear of vehicle for access to frame and components. Particularly useful on vehicles with low profile or ground-effects.

FEATURES:

• Handles tires with up to 16” tread widths.
• Telescopic 34" T-handle extends and lifts up to expose wheels for easy
  maneuverability around the shop. Retracts for easy storage.
• Perforated holes in ramps provide traction for the tires.
• Non-skid rubber base pads prevent slippage when driving onto or off of ramps.

82300D - Norco 1 Ton Wheel Dolly

For the removal and installation of single, tandem and duplex tires and wheels. Rigid front wheels. 

FEATURES:

• Rear swivel caster wheel and rigid front wheels provide positive steering.
• 4" wheels with polyurethane tread protect floor.
• Lift arms can be adjusted in closer to handle the more common dual wheel combinations and then adjusted outward to handle the larger combinations.
• Lift arms with ball bearing rollers easily rotate vehicle rim for bolt pattern alignment.
• Lift arms supported at both ends minimize wheel movement.
• Adjustable height push bar provides unobstructed access to hub area.
• 3-1/4” travel adjustment on rear caster wheel matches lifting arms with spindle angle.
• Safety chain included to secure wheel assembly to dolly during removal and transport.

82302B- Norco 1/2 Ton High Lift Wheel Dolly

For the removal and installation of single, tandem and duplex tires and wheels which are mounted on trucks that are supported above ground level.

FEATURES:

• Heavy duty lift arms made with ball bearing conveyer rollers which allow easy rotation of wheels for alignment with bolt pattern.

• 7-1/2” of side to side lift arm adjustment eliminates the trial and error method of aligning the rim’s lug holes with the wheel drum.

• A 1,500 pound capacity heavy duty winch with 5 to 1 gear ratio provides ease of operation.

• The winch gear design acts as a brake and allows the load to be lowered incrementally if desired and without the need for constant hand pressure against the crank handle.

• A hydraulic jack tilts the lift arms to match the angle of the spindle.

• Safety chain provided to secure tires and wheels to the dolly.

• Maneuverability is made easy by means of two rear mounted ball bearing caster wheels. The caster wheels include a locking mechanism which can prevent the dolly from moving.

910017B- Norco 10,000 PSI Air/Hydraulic Foot Pump

For automotive / truck, industrial & construction jobs. The added convenience of an air motor reduces pumping time and effort to activate cylinders.

FEATURES:

• Designed to utilize exhaust air to help power the pump, requiring only 80 p.s.i. air pressure to develop 10,000 p.s.i. hydraulic pressure.
• Air exhaust muffler for quieter operation.
• Air and oil inlet filters for reduced risk of damage from contamination.
• Designed with durable light weight, corrosion resistant plastics.
• Foot pedal provides hands free pumping and release of load.
• Designed to be used with a single-acting cylinder.
• Internal pressure relief valve for overload protection.

910018B - Norco 10,000 PSI 2-Gal Air/Hydraulic Pump

For automotive / truck, industrial & construction jobs. The added convenience of an air motor reduces pumping time and effort to activate cylinders.

FEATURES:

• Designed to utilize exhaust air to help power the pump, requiring only 80 p.s.i. air pressure to develop 10,000 p.s.i. hydraulic pressure.
• Air exhaust muffler for quieter operation.
• Air and oil inlet filters for reduced risk of damage from contamination.
• Designed with durable light weight, corrosion resistant plastics.
• Foot pedal provides hands free pumping and release of load.
• Designed to be used with a single-acting cylinder.
• Internal pressure relief valve for overload protection.
• Two-gallon capacity steel reservoir body.