78013B - NOR - 12-Ton Shop Press with Hand Pump

FEATURES:

• Welded frame, fully assembled, tested, and ready to put to work.
• Manual pump power unit with “Parkerized” pump piston, ram and extension screw to inhibit rust from entering the hydraulic system.
• Pair of bed plates included.
• Shielded heavy duty ram return springs.
• Power unit is bearing mounted for horizontal movement on head channel.
• Zero distortion, heavy duty structural steel frame.

78024 - Norco 25 Ton Shop Press with Air/Hydraulic Pump

INTENDED USE:

Straightening, bending and pressing.  Removing and installing gears, bearings and bushings.

FEATURES:

• Welded frame, fully assembled, tested, and ready to put to work.

• Air/hydraulic foot pump provides hands free operation.

• Pair of bed plates included.

• Self-retracting ram can slide for horizontal movement on head channel.

• Zero distortion, heavy duty structural steel frame.

• Liquid filled gauge measures ram force and internal working pressure.

78055A - Norco 50-Ton Shop Press with Hand Pump

Intended Use:

 Heavy duty use in truck garages and work shops.

FEATURES:

• Welded frame, fully assembled, tested, and ready to put to work.

• Manually operated two speed pump provides quick ram travel to load.

• Safety overload system protects power unit.

• Hand operated winch raises and lowers press bed.

• Liquid filled gauge measures ram force in pounds and tons.

• Self-retracting ram is bearing mounted for lateral movement on head channel.

78090 - Norco 3600lb. Capacity Car Dolly

78099 - Norco 700 LB Capacity 4 Point Engine Support Tool

The main transverse support bar mounts on the shock strut towers to support engines.  Heavier engines can be supported by using one or both front support adaters on the transverse support bar.

78100 - Norco 1,000 LB Capacity Engine Stand

INTENDED USE:

For safe handling and positioing of most automotive engines.

FEATURES:

• Fully adjustable engine mounting head.

• Long handle and 360 degree rotating head easily position engine.

• One bolt disassembles stand for transporting or storage.

• Heavy wall tubing prevents excessive frame flex.

• 2 rigid wheels in back and 2 swivel caster wheels in front provide maximum stability and support.

• Optional equipment:

  78109: Transmission Adapter

Import option available for $195

78106A - Norco Foldable 2500 LB Capacity Engine Crane

Desinged to raise, lower and transport automobile engines, transmissions, differentials, and other heavy loads with minimal effort.

FEATURES:

• Four position telescopic boom with 3/8” proof chain and swivel mounted hook.

• 3 ton capacity hydraulic power unit provides faster raising action and a large diameter ram to withstand angle loads.

• Low profile design (4-3/4” from top of legs to ground) allows positioning under low ground clearance vehicles.

• Quick foldable legs and boom save shop space (22-1/2” x 51-3/4”) and prepare crane for transport or storage within seconds.

• 4” diameter front wheels and locking rear caster wheels provide positive steering and easy maneuvering. Locking caster wheels secure crane from moving when in use.

78108 - Norco 1250 LB Capacity Engine Stand

For safe handling and positioning of most automotive engines.  Same as model 78100 but with heavier construction to handle V8's.

FEATURES:

• Fully adjustable engine mounting head.
• Long handle and 360 degree rotating head easily position engine.
• One bolt disassembles stand for transporting or storage.
• Heavy wall tubing prevents excessive frame flex.
• 2 rigid wheels in back and 2 locking swivel caster wheels in front provide maximum stability and support.
• Four bolts disassemble stand for transporting or storage.
• Optional equipment:
  78109: Transmission Adapter

78109 - Norco Engine Stand Transmission Adapter

INTENDED USE:

  Replaces engine mounting fingers and converts engine stand into a transmission service stand.

78204A - Norco 1/2 Ton Capacity Truck Crane

Same as the model 78103A but mounts in the bed of a truck or on a loading dock.

FEATURES:

• Four position telescopic boom that folds down for traveling position or storage.
• 5 to 1 gear ratio winch with 20 foot long 1/4” diameter steel cable and hook pulls the load toward the boom.
• Winch gear design acts as a brake and allows the load to be lowered incrementally if desired and without the need for constant hand pressure against the crank handle.
• Hydraulically activated boom lifts the load to the desired height.
• Crane swivels 360 degrees but can be locked in position.

78600B - Norco 3 Ton Capacity Air/Hydraulic Floor Crane

For lifting heavy items including removal and installation of deisel engines and often their transmissions.

FEATURES:

• Multiple boom positions and leg extensions ranging from 49" to 81" provide maximum stability.

• Boom swivels 10 degrees right or left if base cannot be centered under the load.

• Includes a foot activated air/hydraulic foot pump requiring 100 P.S.I. air pressure.

78605A - Norco 3 Ton Capacity Electro/Hydraulic Floor Crane

For lifting heavy items including removal and installation of deisel engines and often their transmissions.

FEATURES:

• Multiple boom positions and leg extensions ranging from 49" to 81" provide maximum stability.
• Boom swivels 10 degrees right or left if base cannot be centered under the load.
• Includes an electro/hydraulic pump requiring 115 VAC.

81004C - Norco 3 Ton Ratchet Style Jack Stand (Pair)

For use where vehicle is to be supported before making repairs.

FEATURES:

• • • Unique spring loaded pawl provides constant locking pressure against lifting column.
    • Four legged base with foot pads for added strength and a more secure footing on asphalt.
    • Common machine bolt secures lifting column to stand and provides added strength when stand is continuously lifted and handled by the column.
    • Recessed column saddle for acceptance of vehicle panel rail.
    • Positive lock handle cannot be disengaged until load is off the saddle column. Lock handle can be used as a carrying handle.
    • ALL STANDS ARE INTENDED TO BE USED IN PAIRS.

81006D - Norco 6 Ton Ratchet Style Jack Stands (Pair)

For automotive use where vehicle is to be supported before making repairs.

FEATURES:

     Unique spring loaded pawl provides constant locking pressure against lifting column.

• Four legged base with foot pads for added strength and a more secure footing on asphalt.
• Common machine bolt secures lifting column to stand and provides added strength when stand is continuously lifted and handled by the column.
• Recessed column saddle for acceptance of vehicle panel rail.
• Positive lock handle cannot be disengaged until load is off the saddle column. Lock handle can be used as a carrying handle.
• ALL STANDS ARE INTENDED TO BE USED IN PAIRS.

81022A - Norco - 20 Ton Capacity Trailer Stabilizing Stand

Meant to stabilize and assist in supporting the front or rear of a loaded or unloaded tractorless trailer.  Sold individually but generally used in pairs.

FEATURES:

• Meets OSHA requirements for supporting trailers when loaded or unloaded.
• 14” diameter base provides maximum leveling stability.
• Quick adjust spin handle for ease of turning.
• Large diamond plate saddle to grip the load.
• 1-1/2” diameter, grade 5, heavy duty screw and nut provide maximum strength and fine adjustment.

Import option available for $210