Norco

Norco
Show:
Sort By:
82019 - Norco - 20 Ton Capacity Truck Ramps (Pair)

    Elevates front or rear of vehicle for access to frame and components. Particularly useful on vehicles with low profile or ground-effects.

    FEATURES:

      •  Handles tires with up to 10” tread widths.
      •  Telescopic 34" T-handle extends and lifts up to expose wheels for easy
         maneuverability around the shop. Retracts for easy storage.
      •  Perforated holes in ramps provide traction for the tires.
      •  Non-skid rubber base pads prevent slippage when driving onto or off of ramps.

 

$590.00

- +
71000D - NORCO - 10-Ton Capacity Floor Service Fast-Jack

71000D - NORCO - 10-Ton Capacity Floor Service Fast-Jack 

For use at heavy duty truck, heavy construction and agricultural equipment maintenance garages.

 FEATURES:

  • Chromed ram and dust seals prevent hydraulic contamination.
  • Safety by-pass and overload systems protect hydraulic block.
  • Air pump models can also be operated manually.
  • Includes the FASTJACK® feature which raises the jack’s lifting saddle to the load with one pump of the “T” handle.
  • Locking release lever secures handle in the vertical, 45 degree or horizontal position to lower the load on all models.

$1,820.00

- +
71202A - NORCO - 2-Ton FastJack Floor Jack

71202A - NORCO - 2-Ton FastJack Floor Jack 

A heavy-duty professional quality floor jack designed for a variety of automotive shop uses including the day to day rigors of the tire changing industry.

 FEATURES:

  • Fast acting pump raises jack to maximum height in 10-1/2 incremental pump strokes.
    Not only lifts fast to the load but lifts load fast.
  • Angular pump piston provides efficient stroke no matter how far under the vehicle the jack is positioned.
  • Nylon front and rear wheels to protect sealed floor surfaces and dealer showrooms.
  • Thick steel side plates provide increased frame strength.
  • 49" two-piece handle for easy shipping and storage.

$395.00

- +
71233A - NORCO - 2-Ton Capacity Double Pump Floor Jack

71233A - NORCO - 2-Ton Capacity Double Pump Floor Jack 

An economical floor jack designed for a variety of automotive shop uses where strength, speed, and dependability are required. 

FEATURES:

  • Covered by a one year limited warranty.

  • Extremely low 2 3/4” low lift height.

  • Safety by-pass system protects pressure cylinder.

  • Safety overload system prevents jack from being used beyond its rated capacity.

  • Heavy duty chassis for added strength and dependability.

  • 50.25" long two-piece handle for easy shipping and storage.

  • Foam handle sleeve is included to protect vehicles from damage.

  • Dual pump piston design raises the jack to maximum height in 8-1/2 pump strokes.

  • U-joint release mechanism for more control.

$284.00

- +
71330 - NORCO - 3 Ton Capacity Lightweight Floor Jack

71330 - NORCO - 3 Ton Capacity Lightweight Floor Jack 

A lightweight jack designed for a variety of automotive shop uses.  Ideal for roadside service calls.

FEATURES:

  • U.S. Patent No. D683104 & 9,022,356
  • Thick aluminum side plates.
  • 48" long two-piece handle with foam handle sleeve.
  • Heavy duty aluminum front and rear wheels.
  • Two-speed pump piston raises the saddle to the load quickly.
  • Two grab handles provide more convenient lifting of the jack.
  • Steel lift saddle for greater durability and strength.

$404.00

- +
71335 - NORCO - 3.5 Ton Capacity SUV & Service Truck Floor Jack

A heavy-duty floor jack designed for a variety of automotive shop uses including the added capacity and maximum lift height required to handle most SUV and 1 Ton+ service trucks.

 FEATURES:

  • U.S. Patent No. D683104 & 9,022,356
  • Steel hydraulic block construction includes a double pump
    piston design that quickly raises the jack to the maximum height
  • Long, two piece handle with knurled hand grip and foam handle sleeve provides:
    - Ease of pumping 
    - Longer reach for positioning under overhang
    - Ease for transportation and storage
    - Ease of pumping in tight quarters when second handle section is removed
  • 4" low and 21-3/8" maximum lift heights (without saddle adapter)
  • 7" low and 24-3/8" maximum lift heights (with saddle adapter)
  • Safety by-pass system protects pressure cylinder
  • Safety overload system prevents jack from being used beyond its rated capacity
  • Heavy-duty chassis for added strength and dependability

 

$359.00

- +
72025 - NORCO - 1 1/2 Ton Capacity Wide Chassis Opening Truck T

72000E - NORCO - 1 1/2 Ton Cap. Truck Transmission Jack 

Same as the model 72000E but with a wider chassis opening plus a broader lift range to handle a larger variety of transmission configurations 

FEATURES:

  • Fully adjustable saddle with adjustable angle brackets to position the transmission.

  • Four 4" high risers handle transmissions with offset transfer cases.

  • Two heavy duty ratchet tie-downs conveniently secure the load to the lifting saddle.

  • Safety by-pass and overload systems to prevent cylinder damage and prevent the jack from being used beyond its rated capacity.

  • Full 360 degree rotating handle operates in any position.

  • Flash chromed ram inhibits rust from entering the hydraulic system.

  • Four full-swivel ball bearing 4" caster wheels for easy positioning.

$1,985.00

- +
72050E - NORCO - 1/2 Ton Cap. Hyd. Transmission Jack

72050E - NORCO - 1/2 Ton Cap. Hyd. Transmission Jack 

For the removal and installation of automobile and light truck transmissions or differentials. 

 FEATURES:

  • Wide chassis with open front provides:

    - Wider opening for saddle and transmission to come lower to the ground for easy removal.

    - Efficient load distribution and stability.

    - Easy access to saddle tilt knobs.

  • Fully adjustable universal saddle with adjustable corner brackets and safety chain.

  • Safety by-pass system prevents damage to cylinder.

  • Safety overload system prevents jack from being used beyond its rated capacity.

  • Full 360 degree rotating pump handle operates in any position.

  • Flash chromed ram inhibits rust from entering the hydraulic system.

  • Four full-swivel ball bearing caster wheels for easy positioning.

  • Wide chassis for efficient load distribution and stability.

 

$505.00

- +
72508 - NORCO - Fuel Tank Saddle Adapter

72508 - NORCO - Fuel Tank Saddle Adapter 

An optional saddle adapter which is used in conjuction with a NORCO transmission jack to remove, install and transport (in lowered position) automobile and light truck emptied fuel tanks and other undercar components

FEATURES:

  • Handles automotive and light duty truck fuel tanks up to 40 gallon capacity.

  • Tanks are to be emptied before handling.

  • Four adjustable support risers with rubber pads protect the fuel tank and can be quickly positioned to fit many shapes and sizes.

  • Includes two load restraint straps.

  • Weight: 37 LBS

$264.00

- +
72525 - NORCO - Quick-Adjust Saddle

72525 - NORCO - Quick-Adjust Saddle 

An optonal saddle that replaces the 4 adjustable corner brackets found on the standard universal saddle.

 FEATURES:

  • Quickly adapts to the existing universal saddle plate.
  • Four low profile ratcheting arms quickly and easily adjust to the transmission pan configuration.

$145.00

- +
72550B - NORCO - 1/2-Ton Telescopic Under-Hoist Double Pump Tran

72550B - NORCO - 1/2-Ton Telescopic Under-Hoist Double Pump Trans. Fast Jack

Designed for the removal, installation and transportation (in the lowered position) of transmissions and transfer cases on passenger cars, vans and light trucks that are raised by an in-ground or above-ground lift.

FEATURES:

  • U.S. Patent No. 5,975,496 (Double Pump Design)

  • Fully adjustable universal saddle with hand adjustable corner brackets and safety chain.

  • Safety overload system prevents jack from being used beyond its rated capacity.

  • Foot operated pump and lowering pedals allow use of both hands to position and align saddle with transmission.

  • Two-stage flash chromed rams inhibit rust from entering hydraulic system.

  • Wide base with four easy rolling 4" diameter swivel ball bearing caster wheels provides stability and easy maneuvering in its lowered position. The polyurethane wheels provide protection for expensive tile and epoxy floors.

  • Two times faster rising action as model 72500E with no load or a load up to 400 pounds.

  • Same rising action as model 72500E for loads between 400 and 1,000 pounds.

$1,075.00

- +
76508B - NORCO 8 Ton Capacity Bottle Jack

 

INTENDED USE:

For heavy duty truck, agriculture, construction, mining, mobile home, oil field, automotive, and marine applications where lifting, pushing, spreading, bending, pressing, or straightening are required.

FEATURES:

  • Two piece zinc plated handle.

  • Prevent rust with “Parkerized” pump piston, ram and extension screw.

  • No leak “Uniweld” construction.

  • 50% safety overload factor.

  • State of the art design reduces repair time.

  • Longer wear life due to internally machined oil passages, smooth bearing surfaces and
    close tolerances.

  • Lightweight forged base provides more steel only where strength is required.

  • The heavy-duty extension screw and release valve were designed to eliminate parts and reduce the chances of breakage and excessive wear.

  • Safety oil by-pass system prevents the ram from being overextended and causing damage to the cylinder.

 

$112.00

- +
76512B - NORCO 12.5 Ton Capacity Low Height Bottle Jack

INTENDED USE:

For heavy duty truck, agriculture, construction, mining, mobile home, oil field, automotive, and marine applications where lifting, pushing, spreading, bending, pressing, or straightening are required.

 

FEATURES:

  • Two piece zinc plated handle.
  • Prevent rust with “Parkerized” pump piston, ram and extension screw.
  • No leak “Uniweld” construction.
  • 50% safety overload factor.
  • State of the art design reduces repair time.
  • Longer wear life due to internally machined oil passages, smooth bearing surfaces and
    close tolerances.
  • Lightweight forged base provides more steel only where strength is required.
  • The heavy-duty extension screw and release valve were designed to eliminate parts and reduce the chances of breakage and excessive wear.
  • Safety oil by-pass system prevents the ram from being overextended and causing damage to the cylinder.

 

$117.00

- +
76535 - NORCO 35 Ton Capacity Bottle Jack

INTENDED USE:

For heavy duty truck, agriculture, construction, mining, mobile home, oil field, automotive, and marine applications where lifting, pushing, spreading, bending, pressing, or straightening are required.

FEATURES:

  • Two piece zinc plated handle.
  • Prevent rust with “Parkerized” pump piston, ram and extension screw.
  • No leak “Uniweld” construction.
  • 50% safety overload factor.
  • State of the art design reduces repair time.
  • Longer wear life due to internally machined oil passages, smooth bearing surfaces and
    close tolerances.
  • Lightweight forged base provides more steel only where strength is required.
  • The heavy-duty release valve was designed to eliminate parts and reduce the chances of breakage and excessive wear.
  • Safety oil by-pass system prevents the ram from being overextended and causing damage to the cylinder.
  • Safety overload system prevents the jack from being used beyond its rated capacity.

$265.00

- +
76560 - NORCO 60 Ton Capacity Bottle Jack

INTENDED USE:

For heavy duty truck, agriculture, construction, mining, mobile home, oil field, automotive, and marine applications where lifting, pushing, spreading, bending, pressing, or straightening are required.

FEATURES:

  • Two piece zinc plated handle.
  • Prevent rust with “Parkerized” pump piston, ram and extension screw.
  • No leak “Uniweld” construction.
  • 50% safety overload factor.
  • State of the art design reduces repair time.
  • Longer wear life due to internally machined oil passages, smooth bearing surfaces and
    close tolerances.
  • Lightweight forged base provides more steel only where strength is required.
  • The heavy-duty release valve was designed to eliminate parts and reduce the chances of breakage and excessive wear.
  • Safety oil by-pass system prevents the ram from being overextended and causing damage to the cylinder.
  • Safety overload system prevents the jack from being used beyond its rated capacity.

$625.00

- +

Automotive Lift and Alignment only ships within the continental United States. For Hawaii and Alaska, please see our FAQ.