American Forge & Foundry
3342SD - AFF - 15,000 lb Fixed High Truck Stand
AFF super heavy duty truck sands are designed for truck and bus support. Spring loaded caster wheels allow for easy positioning and portability. Non skid rubber saddle pad for secure placement.
Call for Price: 877-805-1154
3344SD - AFF - 15,000 lb Fixed Low Truck Stand
AFF super heavy duty truck sands are designed for truck and bus support. Spring loaded caster wheels allow for easy positioning and portability. Non skid rubber saddle pad for secure placement.
Call for Price: 877-805-1154
3420ASD - AFF - 20 Ton Wide Stance Truck Ramps
AFF super heavy duty truck sands are designed for truck and bus support. Spring loaded caster wheels allow for easy positioning and portability. Non skid rubber saddle pad for secure placement.
Call for Price: 877-805-1154
350SS - AFF - Professional 3.5 Ton Heavy-Duty Double-Pumper Floor Jack
350SS - AFF - Professional 3.5 Ton Heavy-Duty Double-Pumper Floor Jack
AFF Floor Jacks are heavy duty and designed to meet the demanding lifting needs of the professional service technician. Features include heavy gauge steel, flanged side plates for strength, UV powder coat paint, and safety overload valve for added protection. These are some of the strongest and most durable jacks in the industry. This unit offers all the features of our Model 350GT with additional speed and efficiency, thanks to AFF’s double-pumper advantage for quicker lifting.
Features:
- Lifts from 4” to 19-1/2”.
- Pinned steel saddle (1-1/8” stud) with rubber pad for added vehicle protection.
- Rear-mounted 2-3/4” swivel casters for ease of maneuverability.
- One-piece 50-1/4” padded handle parks upright
- Equipped with a double pump design to increase speed without compromising overall performance of the jack.
- Second volume pump assists in getting the saddle to load much quicker than most other single pump designs on the market today.
- Tough powder coated frame for longer shop lift
Call for Price: 877-805-1154
3582 - AFF - 4400 LB Capacity Foldable Engine Crane
AFF's Engine Cranes are designed for the easy and efficient removal and transport of vehicle engines. All feature four-position telescopic booms, wide stable bases, forged steel hooks with safety latches and heavy-duty swivel casters.
- AFF Engine Cranes are designed for easy and efficient removal and transportation of vehicle engines. All feature four-position telescopic booms, wide stable bases, forged steel hooks with safety latches and heavy duty swivel castersH. Superior welds in all locations provide maximum strength and durability.
- Designed for shops with limited space and for maximum portability
- Ideal for rental yards
- The legs easily fold up and away and with the ram completely retracted, this uses an extremely small storage footprint
- 360º hook adds greater flexibility in positioning lifting chains during removal and installation
Call for Price: 877-805-1154
3584 - AFF - 6000 LB Capacity Heavy-Duty Engine Floor Crane
AFF's Engine Cranes are designed for the easy and efficient removal and transport of vehicle engines. All feature four-position telescopic booms, wide stable bases, forged steel hooks with safety latches and heavy-duty swivel casters
FEATURES:
- Heavy Duty engine crane with reinforced leg assemblies for added strength and durability
- 4 different boom settings: 3 T, 2 T, 1.5T, 1T
- 12 Ton hydraulic ram has built in safety overload to protect the unit from being used beyond its rated capacity
- Large 4.25" rear swivel casters and 6" fixed front wheels provide ease of mobility and positioning
- Rear of crane stands 61.5" tall and 33" wide
- Distance between front of legs, retracted = 23", extended = 28.5"
- Shipping Weight: 359 lbs.
Call for Price: 877-805-1154
3700 - AFF - Clutch Jack
3700 - AFF - Clutch Jack
AFF Clutch Jack Accessories are designed to assist in all aspects of clutch removal and transport. Accessories include various adapters that are available to make the Clutch Jack a "one-man" operation.
A highly efficient design that provides the technician with capabilities to remove, install and transport heavy duty truck clutches. This heavy duty unit has a greater capacity than most competitive units and has the added versatility of being able to convert the optional adapters for fly wheels, drive shafts, starter motors, auxiliary cases, differentials, brake drums and camel back springs
Features:
- Clutch head assembly turns 360˚ and pivots side-to-side for efficient clutch/engine alignment
- Two splined alignment shafts (2" OD x 1.18" pilot and 1-3/4" OD x .938" pilot)
- Clutch assemblies can easily be built on the vertical shaft and then positioned easily under the truck
- Pump handle rotates 360˚ for ease of operation in virtually any work position
- Unique clevis pinned alignment shaft allows technician to remove jack to install clutch assembly without obstruction
- Alignment shafts have "flats" for open end wrench to aid in clutch indexing and internally threaded for slide hammer removal if needed.
Call for Price: 877-805-1154
3900A - AFF - 5500 LB Capacity Pallet Jack
- Hi-tensile steel frame with 5500 lb. capacity
- Quick hydraulics lift from 3” to 7-3/4”
- Large 27” x 48” platform
- Full 180° steering arc
- Durable, polyurethane-coated steel wheels and entry rollers
- Three-position control lever automatically returns to neutral position
- German-made hydraulic seals for leak-free operation
- Ship weight 228 lbs.
Call for Price: 877-805-1154
3904 - AFF - Hydraulic Table Cart
- 1100 lb. capacity
- Foot pedal-operated table smoothly lifts and lowers engines, transmissions, heavy packages and cargo
- Lifts 32" x 19-1/2" table from 11" to 36"
- Heavy-duty, all-steel construction with four wheels and two wheel brakes
- Handle-mounted pressure release
Call for Price: 877-805-1154
3906 - AFF - Creeper Seat
FEATURES:
- Padded, reinforced, oil-resistant vinyl seat (1-3/4" thick)
- Convenient under seat tray keeps tools and small parts handy
- 1" steel tube frame with four 2-1/2" ball-bearing casters
- Fully assembled
- 17-1/2" L x 14" W x 14" H
Call for Price: 877-805-1154
3907 - AFF - Air Piston Creeper Seat
- Padded, reinforced vinyl seat with air piston for efficient height adjustment to 18"
- Convenient under seat tool and parts tray
- Five 2-1/2" heavy-duty casters
Call for Price: 877-805-1154
3908 - AFF - 42" Heavy Duty Mechanic's Creeper Seat
FEATURES:
- Longer and wider for additional working comfort
- Drop frame at shoulder for ease of movement
- Full-length, padded, oil resistant vinyl center panel
- Six heavy-duty, dual-post casters
- 42" L x 21" W x 3-1/2" H
- Weight capacity: 250lbs
Call for Price: 877-805-1154
3942 - AFF - 6" General Duty Swivel Vice
- Replaceable hardened steel serrated jaws
- Buiilt in pipe jaws 2-1/2" capacity
- 6" Maximum opening
- 3-1/2" Throat depth
- Large anvil surface
- 360° swivel base with 2 locking handles
Call for Price: 877-805-1154
3943 - AFF - 8" General Duty Swivel Vice
- Replaceable hardened steel serrated jaws
- Built in pipe jaws 3-1/2" capacity
- 8" Maximum opening
- 4" Throat depth
- Large anvil surface
- 360° swivel base with 2 locking handles
Call for Price: 877-805-1154
3948 - AFF - 6" Heavy Duty Swivel Vice
- Replaceable Hardened Steel Serrated Jaws
- Built in pipe jaws 3" capacity
- 6" maximum opening
- 4" Throat Depth
- Large anvil surface
- 360° Swivel Base with 2 locking handles
Call for Price: 877-805-1154